PTFE DW201

 

DeWAL D/W 201
聚四氟乙烯
DeWAL Industries

产品说明

DW 201 is skived from a modified homopolymer PTFE (Dupont NXT70)resin containing a higher level of a fully fluorinated comonomer. The incorporation of the comonomer yields a materail with improved electrical and physical properties. This film can be thermally bonded (fused) to itself (625 - 650 degrees F). The modified homopolymer resin exhbits chemical resistance equivalent to that of homopolymer PTFE. Its tensile strength is approximately 25% higher, and the elongation is approximately 60% higher than for homopolymer PTFE. Because of these properties DW 201 is often a good substitute for melt processable films such as PFA. Product can be supplied etched for bonding.

DW 201 may be thermally fused to itself making possible the fabrication of structures used in medical applications, as well as other products fabricated by thermally welding of films together. DW 201 can also be used as a high dieclectric strength fusible wrap in electrical and electronic cable applications. It can be used as a bonding film in the ciruit board industry.

总体

材料状态 • 已商用:当前有效   
供货地区 • 北美洲 • 欧洲  
性能特点 • 均聚物 • 良好的电气性能 • 耐化学性良好 
用途 • 薄膜 • 电子电缆护套材料 • 粘合 
 • 电气/电子应用领域 • 医疗/护理领域的应用  
    
形式 • 薄膜   

物理性能 额定值单位制 
Thickness 12.7 到 1020nm 
薄膜 额定值单位制 测试方法
抗张强度 - MD (屈服) 41.4MPa ASTM D882
伸长率 - MD (断裂) 500% ASTM D882
热性能 额定值单位制 
最高连续使用温度 260°C 
电气性能 额定值单位制 测试方法
介电强度 110kV/mm ASTM D149
补充信息 额定值单位制 
Backing Material PTFE Film 
Core ID 7.62cm 
Maximum Roll OD 356mm 
Width 6.35 到 1270mm 

备注
1 一般属性:这些不能被视为规格。