etfe HT-2181,抗溶解性etfe,水解稳定etfe,阀门/阀门部件etfe,连接器etfe

 

etfe HT-2181,抗溶解性etfe,水解稳定etfe,阀门/阀门部件etfe,连接器etfe
Tefzel HT-2181
乙烯四氟乙烯共聚物
DuPont Fluoropolymers

产品说明

DuPont™ Tefzel® HT-2181 fluoropolymer resin is a general-purpose resin available in translucent, 2.5-mm (0.1-in) pellets. Compared with other grades of Tefzel® , its most unique features are an intermediate flow rate and a balance of properties that make it suitable for a variety of processes and demanding end uses.

Tefzel® HT-2181 and the other Tefzel® fluoropolymers are melt processible, modified copolymers of ethylene and tetrafluoroethylene. They are high-performance resins that can be processed at relatively high rates compared with other fluorocarbon resins. They are mechanically tough and offer an excellent balance of properties.

Tefzel® HT-2181 can perform successfully in applications where other thermoplastics are lacking in mechanical toughness, broad thermal capability, ability to meet difficult environmental conditions, or limited by fabricating problems.

Properly processed products made from neat Tefzel® HT-2181 are inert to most solvents and chemicals, hydrolytically stable, and weather-resistant. The recommended upper service temperature is 155°C (311°F); useful properties are retained at cryogenic ranges. The level and stability of dielectric properties are excellent, and the flame rating is V-0 by the UL94 method. Mechanical properties include outstanding impact strength, cut-through, and abrasion resistance.

Statements, or data, regarding behavior in a flame situation are not intended to reflect hazards presented by this or any other material when under 
actual fire conditions.    
总体    
材料状态 • 已商用：当前有效   
供货地区 • 北美洲 • 欧洲  
 • 南美洲 • 亚太地区  
    
性能特点 • 抗溶解性 • 耐化学性良好 • 耐气候影响性能良好 
 • 抗撞击性，良好 • 耐磨蚀性，良好 • 水解稳定 
    
 • 薄膜 • 管道 • 容器 
用途 • 电气/电子应用领域 • 连接器  
   • 实验室器具 
 • 阀门/阀门部件 • 密封  
    
外观 • 半透明   
形式 • 颗粒料   
加工方法 • 吹塑成型 • 树脂传递成型 • 注射成型 
 • 挤出 • 压缩模塑  
    
etfe HT-2181,抗溶解性etfe,水解稳定etfe,阀门/阀门部件etfe,连接器etfe    
物理性能  额定值单位制 测试方法 
比重  1.70g/cm³ ASTM D792 
表观密度  1.30g/cm³ ASTM D1895 
熔流率 (297°C/5.0 kg)  6.0g/10 min ASTM D1238 
吸水率 (24 hr)  0.0070% ASTM D570 
机械性能  额定值单位制 测试方法 
抗张强度 (23°C)  42.1MPa ASTM D638 
伸长率 (断裂, 23°C)  300% ASTM D638 
弯曲模量 (23°C)  1000MPa ASTM D790 
压缩强度 (23°C)  0.117MPa ASTM D695 
冲击性能  额定值单位制 测试方法 
悬壁梁缺口冲击强度 (23°C)  无断裂 ASTM D256 
硬度  额定值单位制 测试方法 
硬度计硬度 (邵氏 D)  67 ASTM D2240 
热性能  额定值单位制 测试方法 
熔融温度  255 到 280°C  
线形膨胀系数 - 流动 (0 到 100°C)  0.00013cm/cm/°C ASTM D696 
电气性能  额定值单位制 测试方法 
体积电阻率  1.0E+17ohm•cm ASTM D257 
介电强度 (0.254 mm)  71kV/mm ASTM D149 
介电常数 (23°C, 1 MHz)  2.55 ASTM D150 
耗散因数 (23°C, 1 MHz)  0.0060 ASTM D150 
耐电弧性  122sec ASTM D495 
可燃性  额定值单位制 测试方法 
UL 阻燃等级  V-0 UL 94 

1 / 2

 
 
 
 
 
 
Tefzel HT-2181  2012年9月30日
乙烯四氟乙烯共聚物  
DuPont Fluoropolymers  
可燃性 额定值单位制 测试方法
极限氧指数 31% ASTM D2863
补充信息  
Limiting Oxygen Index, ASTM D2863: 30 to 32%  
Dielectric Constant, ASTM D1531, 1 MHz, 73°F: 2.5 to 2.6