13549213581  肖生

 

抗溶解性, 流动性高, 高 ESCR（抗应力裂纹）, 烟释放低, 半导体模制化合物,耐化学性, FDA食品接触, 良好的电气性能, 耐气候, 薄质涂料, 管道, 液体处理, 吹塑成型, 树脂传递成型, 挤出, 压缩模塑, 注射成型

 

PFA 416HP

全氟烷氧基

Technical Data

 

产品说明

 

For inventory control purposes product name may be followed by an X.

 

Products labeled PFA 416 HP and PFA 416 HP X are equivalent and all information in this document is applicable to both.

 

Typical Application

Applications for PFA 416HP include high performance thin-wall wire coatings; intricate injection molded parts for production of chemicals where purity in the parts-per-billion range is needed; semiconductor components and electronic parts; and fluid handling systems for high performance chemical filters. With a typical melt flow rate of 42, PFA 416HP resin is ideally suited for applications requiring a high processing speed and very low viscosity.

 

Description

 PFA 416HP is a special purpose fluoroplastic resin available in pellet form. This resin has a higher melt flow rate (typical MFR of 42) than most other PFA fluoroplastic resins, which permits higher extrusion speed and easier processing, making PFA 416HP a cost-effective alternative for producing thin-wall and complicated articles. Unlike other high melt flow rate polymers, PFA 416HP is specially formulated to provide a high melt flow rate for processing ease, while still providing good flexural properties and stress-crack resistance. These unique properties, coupled with the resin's high thermal stability, enable thin coatings of ultra-fine wires and injection molding of complex parts. Table 1 shows the typical property data for Teflon ® PFA 416HP.

 

The enhanced purity of PFA 416HP makes it suitable for applications that require improved color, lower extractable fluorides, and freedom from other foreign materials. PFA 416HP contains no additives and is designed for hostile chemical environments where purity in the parts-per-billion range is needed. PFA 416HP combines the processing ease of conventional thermoplastics with many properties similar to those of polytetrafluoroethylene. Compared to other thermoplastics, the high melt strength and thermal stability of PFA 416HP can be used to improve processing rates, and allows intricate electronics to be insulated with an extremely thin coating and still withstand soldering.

 

Properly processed products made from neat PFA 416HP resin provide the superior properties typical of the fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance.

 

In a flame situation, products of  PFA 416HP resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.

 

 PFA 416HP meets the requirements of ASTM D3307, Type IX

 

总体

 

材料状态 • 已商用：当前有效

资料 1 •  Technical Datasheet (English)

 

供货地区 • 北美洲 • 欧洲

• 拉丁美洲 • 亚太地区

• High Purity • 流动性高 • 韧性良好

• 低摩擦系数 • 耐化学性良好

• 食品接触的合规性

性能特点 • 良好的电气性能 • 耐气候影响性能良好

• 吸潮性差

• 良好的熔体强度 • 耐热性，中等

• 烟释放，低

• 良好的柔韧性 • 热稳定性，良好

用途 • Filters • 薄质涂料 • 液体处理

• 半导体模制化合物 • 电气部件

机构评级 • EU No 10/2011 • FDA 21 CFR 177.1550

形式 • 颗粒料

加工方法 • 挤出 • 压缩模塑

• 树脂传递成型 • 注射成型

物理性能 额定值单位制 测试方法

比重 2.14g/cm³ ASTM D792

熔流率 (372°C/5.0 kg) 42g/10 min ASTM D3307

ISO 12086

吸水率 (24 hr) < 0.030% ASTM D570

 

PFA 416HP

全氟烷氧基

机械性能 额定值单位制 测试方法

抗张强度 (23°C) 25.0MPa ASTM D3307

ISO 12086

伸长率 (断裂, 23°C) 350% ASTM D3307

ISO 12086

弯曲模量 (23°C) 690MPa ASTM D790

ISO 178

硬度 额定值单位制 测试方法

硬度计硬度 (邵氏 D) 55 ASTM D2240

ISO 868

热性能 额定值单位制 测试方法

熔融温度 305°C ASTM D4591

电气性能 额定值单位制 测试方法

体积电阻率 1.0E+18ohm•cm ASTM D257

ISO 1325

介电强度

0.250 mm 3 80kV/mm ASTM D149

0.250 mm 80kV/mm IEC 60243-1

介电常数 (1 MHz) 2.03 ASTM D150

IEC 60250

耗散因数 (1 MHz) < 0.00020 ASTM D150

IEC 60250

可燃性 额定值单位制 测试方法

UL 阻燃等级 4 V-0 UL 94

极限氧指数 > 95% ASTM D2863

ISO 4589-2

补充信息 额定值单位制 测试方法

Critical Shear Rate (372°C) 12.0sec^-1

MIT Folding Endurance 5 (200.0 µm) 4.0E+3Cycles ASTM D2176

Weather and Chemical Resistance: Outstanding

 

 

 

 

全氟烷氧基PFA 416HP塑料是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123

 

13549213581  肖生