13549213581  肖生

 

抗溶解性, 流动性低, 高 ESCR（抗应力裂纹）, 烟释放低,耐化学性, FDA食品接触, 良好的电气性能, 耐气候, 衬里, 管道, 液体处理, 吹塑成型, 树脂传递成型, 挤出, 压缩模塑, 注射成型

 

PFA 451HP

全氟烷氧基

 

产品说明

 

For inventory control purposes product name may be followed by an X.

 

Products labeled PFA 451HP and PFA 451HP X are equivalent and all information in this document is applicable to both.

 

Typical Application

PFA 451HP is preferred in applications where purity in the parts-per-billion range, surface smoothness, and the highest levels of chemical permeation resistance are required; including tubing, unsupported pipe linings for the production of ultra-pure chemicals, semiconductor components, and fluid handling components for high-performance chemical delivery systems where stress-crack resistance is critical.

 

Description

 PFA 451HP is a special purpose fluoroplastic resin available in pellet form. This resin is a chemically modified form of PFA 350 that combines many of the advantages of the parent resin with several additional benefits. PFA 451HP exhibits improved surface smoothness achieved through minimization of spherulite size, enhanced chemical permeation resistance achieved by increasing its crystallinity from Teflon ® PFA 450HP, enhanced purity, and improved thermal stability while processing.

 

PFA 451HP is a relatively low melt flow rate (typical MFR of 2), premium resin with the lowest level of extractables designed to meet ultra-high purity requirements. An enhanced resistance to environmental stress-cracking and chemical permeation make PFA 451HP a preferred resin when extended service is required in hostile environments involving chemical, thermal, and mechanical stress. Additionally, the enhanced purity of Teflon ® PFA 451HP makes it suitable for applications that require improved color, lower extractable fluorides, and freedom from other foreign materials. This product contains no additives and is designed for hostile chemical environments where purity in the parts-per-billion range is needed. Examples are in semiconductor manufacture, fluid handling systems for industry or life sciences, and instrumentation for precise measurements of fluid systems. Compared to other thermoplastics, the high melt strength and thermal stability of PFA 451HP can be used to improve processing rates, combining the processing ease of conventional thermoplastics with many properties similar to those of polytetrafluoroethylene.

 

Properly processed products made from neat PFA 451HP resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance.

 

In a flame situation, products of PFA 451HP resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke.

 

 PFA 451HP meets the requirements of ASTM D3307, Type II

 

总体

 

材料状态 • 已商用：当前有效

资料 1 •  Technical Datasheet (English)

供货地区 • 北美洲 • 欧洲

• 拉丁美洲 • 亚太地区

• High Purity • 良好的柔韧性 • 热稳定性，良好

• 低摩擦系数 • 流动性低 • 韧性良好

性能特点 • 高 ESCR（抗应力裂纹） • 耐化学性良好 • 食品接触的合规性

• 良好的电气性能 • 耐气候影响性能良好 • 吸潮性差

• 良好的熔体强度 • 耐热性，中等 • 烟释放，低

用途 • 衬里 • 管道系统

• 管道 • 液体处理

机构评级 • EU 10/2011 • FDA 21 CFR 177.1550

形式 • 颗粒料

加工方法 • 吹塑成型 • 树脂传递成型 • 注射成型

• 挤出 • 压缩模塑

物理性能 额定值单位制 测试方法

比重 2.14g/cm³ ASTM D792

熔流率 (372°C/5.0 kg) 2.0g/10 min ASTM D3307

ISO 12086

吸水率 (24 hr) < 0.030% ASTM D570

 

PFA 451HP

全氟烷氧基

机械性能 额定值单位制 测试方法

抗张强度 ASTM D3307

23°C 33.0MPa ISO 12086

200°C 18.0MPa

伸长率 ASTM D3307

断裂, 23°C 360% ISO 12086

断裂, 200°C 500%

弯曲模量 ASTM D790

23°C 410MPa ISO 178

200°C 54.0MPa

硬度 额定值单位制 测试方法

硬度计硬度 (邵氏 D) 55 ASTM D2240

ISO 868

热性能 额定值单位制 测试方法

熔融温度 305°C ASTM D4591

电气性能 额定值单位制 测试方法

体积电阻率 1.0E+18ohm•cm ASTM D257

ISO 1325

介电强度

0.250 mm 3 80kV/mm ASTM D149

0.250 mm 80kV/mm IEC 60243-1

介电常数 (1 MHz) 2.03 ASTM D150

IEC 60250

耗散因数 (1 MHz) < 0.00020 ASTM D150

IEC 60250

可燃性 额定值单位制 测试方法

UL 阻燃等级 4 V-0 UL 94

极限氧指数 > 95% ASTM D2863

ISO 4589-2

补充信息 额定值单位制 测试方法

Critical Shear Rate (372°C) 12.0sec^-1

MIT Folding Endurance 5 (200.0 µm) 7.0E+3Cycles ASTM D2176

Weather and Chemical Resistance: Outstanding

 

 

 

 

 

 

全氟烷氧基PFA 451HP塑料是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123

 

13549213581  肖生