13549213581  肖生

 

 

 

 

  Compound Grades

 

 

Fluon® ETFE compound grades are designed for applications where enhanced properties over natural ETFE are required e.g. improved wear resistance, reduced mould shrinkage, improved compressive resistance, increased flexural strength, flexural modulus, improved dimensional stability.

 

Fluon® ETFE has a wide operating temperature range (-180° to +150°C)

 

(This information sheet contains typical property data which should not be used for specification purposes.)

 

 

 

 

 

 

Fluon® ETFE Compound Grades

 

Grade MFR Filler Filler Tensile Elong. Flexural Flexural Processing Applications/

g/10 Type Level Strength to break Strength Modulus Characteristics

mins (% by wt) (MPa) (%) (MPa) (MPa)

D3159 D-638 D-638 D-790 D-790

ETFE 10 CF TBA Carbon 10 TBA TBA TBA TBA Injection Improved stiffness

464-102- fibre moulding & (high flexural

515** compression modulus)

moulding

ETFE 20 CF 4 Carbon 20 36 6 53 2585 Injection Improved stiffness

464-102- fibre moulding & (high flexural

506 compression modulus)

moulding

CF-8011 6.5 - 9 Carbon 10 36 20 36 1800 Injection Improved

fibre moulding abrasion

molybdenum

disulphide

FP-EP- Glass fibre 25 52 2 104 4798 Injection Improved

105*** moulding dimensional

stability

PM-8015 6.5 - 12 PTFE 15 29 - 23 980 Injection Lower friction

moulding

 

**ETFE 10 CF 464-102-515 is an experimental grade & data would be available on request when launched commercially.

 

***Glass fibre filled ETFE compounds are available in 5%, 10%, 15% or 25% loadings (the 25% glass filled grade is listed above).

 

 

 

Fluon® is a trademark of Asahi Glass Company

 

 

 

 

 

 

 

 

 

 

 

乙烯四氟乙烯共聚物  AGC(日本旭硝子) ETFE ETFE 10 CF 464-102-515塑料是东莞市双帮塑胶原料有限公司常年销售的塑料，因为塑料价格行情每天都有新变化前天的报价不等于今天的报价。本公司销售的所有原料保证是原厂原包,随料可以提供生产厂商提供的物性表、SGS报告，COA原料出厂报告,UL黄卡,ROSH报告,reach报告,SVHC报告,提供原料注塑加工工程中可能出现的各种异常现象解决方法，塑料牌号太多，本网站没有提供的本公司也有代理，详情请咨询本公司相关业务人员0769-87795123

 

13549213581  肖生